Inconel 718 Round Bar

Inconel Products

Inconel 600 Round Bar

Home » Inconel 600 Round Bar

Table of Content

Get In Touch

Inconel 600 Round Bar is one of the alloys that has been highly applied in high-temperature services. Inconel 600 comprising products of round bars under this grade, offers dependable services due to high endurance to heat, corrosion, and oxidation in rough conditions.

Alloy 600 round bar is made of nickel, chromium, and iron, and therefore, it remains strong and does not change its dimensions when conditions become extreme. Featuring a chromium content of about 15 percent, these bars are immune to scaling and oxidation even at high temperatures, and that is why they can be used in the situations of constant exposure to the hot and reactive atmospheres.

The nickel content of approximately 72 percent contributes to the ability of the bars to maintain mechanical properties even in the presence of heat, so that there is structural integrity in areas where reliability is most important.

Because of this, Inconel 600 bar and Inconel 600 rod goods are a smart choice for furnace parts, heat exchangers, and chemical processing equipment that needs to work the same way every time.

ASTM B166 Inconel Alloy 600 Bright Bar, Inconel 600 Round Bar Suppliers, Inconel Alloy 600 Forged Round Bar, Inconel DIN 2.4816 Hex Bars, Inconel 600 Forging Round Bar, Alloy 600 Cold Finished Bars Suppliers in India.

Lakshya Steel is a manufacturer and supplier of Inconel 600 bar (ASTM/ASME B166 / SB166, UNS N06600), in the form of Bright Round Metric (BRM) and shaft-quality bars of valve shafts, piston shafts, pump shafts, cylinder shafts, boat shafts and bearing bars. Being one of the reliable suppliers of the Inconel 600 round bar, we maintain the stock of the Inconel 600 bars to meet the immediate needs.

Drawing bars that are SB166 / UNS N06600 are listed with tighter size tolerance, straightness as well as better tensile and yield strength with better machinability. In addition to standard ASTM B166 alloy 600 Bar, we also offer turned and polished (T&P), turned ground polished (TGP), and drawn ground polished (DGP) finishes in round form, square, hex, and flat.

Our standard ASTM B166 Inconel 600 round bar and alloy 600 round bar forgings such as forged round bars, forged flat bars, forged square bars as well as forged stepped shafts are used in many industries. These forged parts are usually stronger in the core than the rolled bars, as they have a solidified forged core. On request, matching Inconel 600 rod and Inconel 600 welding rod choices are offered.

Inconel UNS N06600 Round Bars, Alloy 600 Forged Bar Stock, Inconel 600 Flat Bar Exporter, Inconel Alloy 600 Forged Bar, Inconel 600 Square Bars Leading Manufacturers.

Inconel 600 bars are a highly resistant material which is used in a broad variety for different industry. Because of its corrosion properties under stress, this can be used to make aerospace components, chemical plants, and marine services. This is due to its corrosion resistance, which will prolong life, reduce maintenance, and enhance overall efficiencies of parts that are manufactured on Inconel 600 bar or alloy 600 round bar.

The mechanical profile of the Inconel 600 bar also makes it versatile as it has high tensile strength and it is fabricable. It may be machined, welded and shaped to various forms to fit certain industrial requirements and needs, that is whether you are in need of the Inconel 600 rod or the alloy 600 round bar in special sizes.

Inconel 600 bar has proven to be reliable when used in applications that are subjected to variation in temperature or harsh conditions. Its thermal expansion properties are similar to most metals, which will enhance stability and minimize the occurrence of thermal-stress failures during service.

To provide reliability, accurate manufacturing and strict QA is necessary. Bars are manufactured to accepted levels and undergo extensive testing and inspection to ensure that the suppliers of the Inconel 600 round bar can supply consistent stocks of the bar to the key sectors; other matching consumables like the Inconel 600 welding rod are in place to facilitate qualified fabrication.

Types Of Inconel 600 Round Bar

You should first consider the forms of Inconel 600 bars available such as bright round bar, hex bar, square bar, and flat bar, before you buy to suit your component requirements. This section provides a summary of the common variants such that you can specify which alloy 600 round bar is right in terms of performance and cost.

INCONEL 600 SQUARE BAR

Inconel 600 square bar

INCONEL ALLOY 600 FORGEDBARS

Inconel alloy 600 forgedbars

Inconel® alloy 600 hollow bar copy

Inconel® alloy 600 hollow bar copy

INCONEL® ALLOY 600 HOLLOW BAR

Inconel® alloy 600 hollow bar

ALLOY 600 HEX BAR

Alloy 600 hex bar

INCONEL 600 ROUND BARS

Inconel 600 round bars

Equivalent Grades of Inconel 600 Bars

The issue of cross-referencing becomes relevant when sourcing internationally. It is found here amongst other standards such as UNS N06600, WNR 2.4816 and others and, therefore, Inconel 600 bar choices are assured of compatibility with multi-standard requirements with ease.

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe

Alloy 600 Bars Chemical Composition

When corrosion or high heat is critical, composition drives outcomes. Use this table to confirm nickel–chromium–iron ranges for alloy 600 bar, supporting QA, certification, and material selection.

C Mn Si S Cu Fe Ni Cr
0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00

Mechanical Properties of Nickel Alloy 600 Round Bars

Reliable design begins with verified material data. This section summarizes tensile strength, yield strength, elongation, hardness, and temperature-dependent behavior to qualify Alloy 600 round bars for service.

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %

Dimensions of Inconel 600 Round Bar

Fit, machining, and tolerance are based on accurate sizing. See standard dimension, cutting, and finish allowances of Inconel 600 rod.

Size Kgs / Mtr Kgs / Foot Size Kgs / Mtr Kgs / Foot Size Kgs / Mtr Kgs / Foot
3mm 0.055 0.017 20mm 2.470 0.753 3″ 35.762 10.900
1/8″ 0.062 0.019 22mm 2.979 0.908 3-1/4″ 41.996 12.800
5/32″ 0.095 0.029 7/8″ 3.038 0.926 3-1/2″ 48.772 14.850
4mm 0.098 0.030 24mm 3.543 1.080 3-3/4″ 55.780 17.001
3/16″ 0.141 0.043 25mm 3.871 1.180 4″ 63.340 19.306
5mm 0.154 0.047 1″ 3.970 1.210 4-1/4″ 72.249 21.908
7/32″ 0.190 0.058 26mm 4.170 1.271 4-1/2″ 80.340 24.4487
6mm 0.223 0.068 27mm 4.490 1.368 4-3/4″ 90.249 27.366
1/4″ 0.249 0.076 1-1/8″ 5.033 1.534 5″ 99.940 30.461
7mm 0.298 0.091 30mm 5.548 1.691 5-1/2″ 121.000 36.690
5/16″ 0.387 0.118 1-1/4″ 6.349 1.924 6″ 143.900 43.860
8mm 0.398 0.120 32mm 6.314 1.894 6-1/2″ 167.630 51.093
9mm 0.498 0.152 1-3/8″ 7.550 2.303 7″ 196.000 59.432
3/8″ 0.557 0.170 35mm 7.553 2.390 7-1/2″ 225.000 68.226
10mm 0.620 0.189 36mm 7.999 2.438 8″ 254.55 77.586
11mm 0.748 0.228 38mm 8.903 2.792 10″ 397.140 121.048

Alloy 600 Flat Bar HSN Code

Correct tariff classification reduces customs risk and delays. The following guidance identifies the applicable HSN/HS codes for Alloy 600 flat bars to support compliant documentation and duty assessment.

Material HS code
Inconel 600 75051220

WNR 2.4816 Round Bar Sizes in Stock

Availability has a direct impact on schedule and cost assurance. Look at common ex-stock diameters and options of country-of-origin used in WNR 2.4816 (Inconel 600) to match the lead times with the needs of the project.

Material Length Diameter Make
Inconel 600 Round Bar, Inconel 600 Flat Bar, Inconel 600 Hex Bar 50 mm to 6000 mm Long 0.5 mm to 500 mm Indian, European and Japanese origin

Inconel 600 Round Bar & Rods Sizes

Component geometry and machining strategy drive size selection. Use this overview of standard Inconel 600 bar and rod diameters to choose starting stock that meets design and machining allowances.

ASTM/ Canadian Metric Japanese US Bar
Bar Size Diam. (mm2) Bar Size Diam. (mm) Bar Size Diam. (mm) Bar Size Diam. (Inch)
10M 100 5 5 6 6 #2 0.250
15M 200 5.5 5.5 10 10 #3 0.375
20M 300 6 6 13 13 #4 0.500
25M 500 7 7 16 16 #5 0.625
30M 700 8 8 19 19 #6 0.750
35M 1000 9 9 22 22 #7 0.875
45M 1500 10 10 25 25 #8 1.000
55M 2500 11 11 29 29 #9 1.125
– – 12 12 32 32 #10 1.250
– – 14 14 35 35 #11 1.375
– – 16 16 38 38 #12 1.500
– – 18 18 41 41 #13 1.625
– – 20 20 44 44 #14 1.750
– – 22 22 48 48 #15 1.875
– – 25 25 51 51 #16 2.000
– – 28 28 57 57 #18 2.250

Inconel 600 Cold Drawn & Hot Worked Round Bar

Processing route affects properties and finish. Compare cold drawn versus hot worked Inconel 600 round bar to balance strength, straightness, and machinability. The table below provides you with the specifications of these two round bars. 

Alloy(s) Condition   Diameter Tol. (over(+)/under(-))  Spec. Diameter, in.
600 Cold Drawn  – 0.003″  0.1875 to 0.5, excl.
600 Cold Drawn – 0.002″ 0.0625 to 0.1875, excl.
600 Cold Drawn  + 0.001″, – 0.002″  0.5 to 0.9375, incl.
600 Cold Drawn + 0.002″, – 0.004″ Over 1.9375 to 2.5, incl.
600 Cold Drawn  + 0.0015″, – 0.003″  Over 0.9375 to 1.9375, incl. 

Inconel 600 Hot Worked Round Bar

Alloy(s) Condition   Spec. Diameter, in.  Diameter Tol. (over(+)/under(-))
600 Hot Worked  Over 4, incl.  + 0.125″, – 0.063″ 
600 Hot Worked  Over 1 to 2, incl. + 0.031″, – 0.016″ 
600 Hot Worked  Over 2 to 4, incl. + 0.047″, – 0.031″ 
600 Hot Worked Up to 1, incl. +/- 0.016″

Inconel 600 Round Bar Straightness Tolerance

Precision assemblies demand controlled runout. Refer to these straightness limits to safeguard bearing life and shaft alignment on alloy 600 round bar deliveries.

Alloy(s) Condition  Specified Diameter, in. Max. Allowed Deviation from Straight
600 Hot Worked Any 0.050 × Measured Length, ft.
600 Cold Worked 1/2 to 4 0.030 × Measured Length, ft.

Tolerance of Inconel 600 Bright Round Bar

The tolerance level ensures the lifetime of the Inconel 600 Round Bar. Confirm BRM tolerances here so Inconel 600 bar stock meets fit requirements straight off the rack.

Nominal Size H12 H11 H10 H9 H8 H7 H6 H5
Diameter mm
~ to 3 +0.1/0 +0.06/0 +0.04/0 +0.025/0 +0.014/0 +0.01/0 +0.006/0 +0.004/0
over 3 to 6 +0.12/0 +0.075/0 +0.048/0 +0.03/0 +0.018/0 +0.012/0 +0.008/0 +0.005/0
over 6 to 10 +0.15/0 +0.09/0 +0.058/0 +0.036/0 +0.022/0 +0.015/0 +0.009/0 +0.006/0
over 10 to 18 +0.18/0 +0.11/0 +0.07/0 +0.043/0 +0.027/0 +0.018/0 +0.011/0 +0.008/0
over 18 to 30 +0.21/0 +0.13/0 +0.084/0 +0.052/0 +0.033/0 +0.021/0 +0.013/0 +0.009/0
over 30 to 50 +0.25/0 +0.16/0 +0.1/0 +0.062/0 +0.039/0 +0.025/0 +0.016/0 +0.011/0
over 50 to 80 +0.3/0 +0.19/0 +0.12/0 +0.074/0 +0.046/0 +0.03/0 +0.019/0 +0.013/0
over 80 to 120 +0.35/0 +0.22/0 +0.14/0 +0.087/0 +0.054/0 +0.035/0 +0.022/0 +0.015/0
over 120 to 180 +0.4/0 +0.25/0 +0.16/0 +0.1/0 +0.063/0 +0.04/0 +0.025/0 +0.018/0
over 180 to 250 +0.46/0 +0.29/0 +0.185/0 +0.115/0 +0.072/0 +0.046/0 +0.029/0 +0.02/0

Inconel 600 Round Bar Price Per Kg List

Budgeting requires clear benchmarks. Review current Inconel 600 round bar price-per-kg ranges by size and finish to compare quotes and plan costs.

Inconel Alloy 600 Round Bar Price List PACK QTY PRICE
Price of Alloy 600 Round Bar 10.0mm dia x 500mm long 1 £65.00
Price of Alloy 600 Round Bar 10.0mm dia x 500mm long 2 £96.00
Price of Alloy 600 Round Bar 10.0mm dia x 500mm long 3 £128.00
Price of Alloy 600 Round Bar 10.0mm dia x 500mm long 4 £154.00
Price of Alloy 600 Round Bar 10.0mm dia x 500mm long 5 £176.00
Price of Alloy 600 Round Bar 10.0mm dia x 1000mm long 1 £81.00
Price of Alloy 600 Round Bar 10.0mm dia x 1000mm long 2 £129.00
Price of Alloy 600 Round Bar 10.0mm dia x 1000mm long 5 £267.00
Price of Alloy 600 Round Bar 10.0mm dia x 2000mm long 1 £122.00
Price of Alloy 600 Round Bar 10.0mm dia x 2000mm long 2 £202.00
Price of Alloy 600 Hex Bar / Rod 10mm (A/F) x 1000mm Length 1 $101.16
Price of Alloy 600 Hex Bar / Rod 10mm (A/F) x 1000mm Length 3 $258.52
Price of Alloy 600 Hex Bar / Rod 10mm (A/F) x 1000mm Length 5 $368.11
Price of Alloy 600 Hex Bar / Rod 10mm (A/F) x 2000mm Length 1 $182.65
Price of Alloy 600 Hex Bar / Rod 10mm (A/F) x 2000mm Length 3 $427.12

Frequently Asked Questions About Inconel 600 Round Bar

What Are the Temperature Limits for Inconel 600?
Inconel 600 can operate in temperatures ranging from cryogenic conditions (as low as -200°C) to elevated temperatures up to 2000°F (1093°C), maintaining excellent mechanical properties and corrosion resistance throughout this range.
What Are the Common Welding Techniques for Inconel 600 Bar?
Common welding techniques for Inconel 600 include TIG (GTAW), MIG (GMAW), and plasma arc welding (PAW). TIG welding is often preferred for creating clean, high-quality welds with precise heat control and minimal spatter.
Is Inconel 600 Flat Bar Magnetic?
No, Inconel 600 is non-magnetic with a relative permeability of 1.01. Like other nickel-based alloys, it remains non-magnetic even after cold working or heat treatment, making it suitable for applications where magnetism is undesirable.
What makes Inconel 600 ideal for chemical processing?
Inconel 600 offers excellent corrosion resistance, immunity to chloride-ion stress corrosion cracking, resistance to organic and inorganic acids, oxidation resistance, and maintains high strength in harsh chemical environments and high temperatures.
Request A Quote

    Talk To Us – We’re Here To Help

    [hidden post-url default:shortcode[_post_url]]

    Fill the Captcha

    Our Products

    Our Latest Blogs
    Enquire Now
    close slider

      Enquire Now

      Need pricing or technical specs?

      [hidden post-url default:shortcode[_post_url]]

      Fill the Captcha