Corten and Weathering Steel Products Supplier in India
Lakshya Steel supplies weathering steel plates, sheets, pipes and tubes in Corten, ASTM, EN and IRSM grades for architectural, structural and industrial projects.Corten steel is a weathering steel developed for applications where the material will be exposed to outdoor conditions. Under suitable exposure, its surface forms a rust-like patina that can help slow further atmospheric corrosion while giving the steel its distinctive appearance. The performance of this protective layer depends on the grade, surrounding environment, drainage and wet-dry exposure cycle.
Lakshya Steel supplies Corten and weathering steel products for construction, infrastructure, fabrication, railway and architectural requirements. The range includes Corten A and Corten B plates and sheets, IRSM 41-97 plates, ASTM A242 and ASTM A588 weathering steel, pipes, tubes and ASTM A423 Grade 1 tubes.
Corten A is commonly considered for thinner architectural and fabricated products, while Corten B is used for heavier structural plate applications. Other weathering steel grades should be selected according to the design standard, section thickness, structural requirement and exposure conditions. The product should not be selected only for its appearance, especially where the surface may remain continuously wet or exposed to unsuitable atmospheric conditions.
Share the required grade, product form, thickness, dimensions, quantity, testing requirements and delivery location with Lakshya Steel for a project-specific quotation.
Corten Steel Products List
Corten A Steel Plates & Sheets
Corten B Steel Plates & Sheets
Corten Steel IRSM 41/97 Plates
Corten Steel ASTM A242 Type 1 Plates
Corten Steel ASTM A242 Type 2 Plates
Corten Steel Plate ASTM A588 Gr A Plates
Carbon Steel Plates & Sheets
Corten / Weathering Steel Product Range
|
Product / Grade |
Buyer Use |
|---|---|
|
Weathering flat products for suitable architectural and fabricated applications. |
|
|
Structural weathering plate for heavier sections. |
|
|
Indian railway weathering steel plate. |
|
|
ASTM weathering structural plate. |
|
|
Structural weathering steel plate. |
|
|
S355J0W and related EN grades. |
|
|
Weathering steel hollow products selected by standard. |
|
|
Weathering-resistance tube for defined heat-transfer service. |
Material and Grade Selection Guide
|
Option |
Reference / Composition Basis |
Choose It When |
Selection Caution |
|---|---|---|---|
|
COR-TEN A |
Trademarked weathering steel family, often used in thinner architectural products |
Facades, art and fabricated panels under suitable exposure |
Verify licensed grade, thickness and equivalent standard. |
|
COR-TEN B |
Weathering structural steel for heavier plate applications |
Bridges, structures and heavy fabrication |
Use grade-specific structural design values. |
|
ASTM A242 |
High-strength low-alloy structural weathering steel |
Structural plate and shapes |
Type and thickness restrictions apply. |
|
ASTM A588 |
Structural weathering steel with minimum-yield classes by thickness |
Bridges and structural fabrication |
Grade and thickness determine properties. |
|
EN S355J0W / S355J2W |
European structural weathering grades |
Structural plate with defined impact requirement |
Suffix defines impact test temperature. |
|
IRSM 41-97 |
Indian Railways weathering steel specification |
Railway wagons and approved structural applications |
Use the current project specification and test requirements. |
|
ASTM A423 Grade 1 |
Seamless and welded low-alloy tube with improved atmospheric corrosion resistance |
Heat exchangers and related tube service |
Product standard applies to tube, not general plate. |
Standards by Product Form
|
Product Form |
Common Reference |
What to State in the Enquiry |
|---|---|---|
|
Structural plate and shapes |
ASTM A242 / A588 |
Grade, type, thickness, dimensions and structural properties |
|
Cold-formed sheet |
ASTM A606 |
Type, thickness, finish and forming requirement |
|
European weathering plate |
EN 10025-5 |
Complete grade suffix, thickness and impact requirement |
|
Railway weathering plate |
IRSM 41-97 |
Current railway/project specification and testing |
|
Heat-exchanger tube |
ASTM A423 Grade 1 |
OD, wall, length, seamless/welded and testing |
|
Trademarked COR-TEN product |
SSAB data sheet / licensed mill document |
Verify genuine grade, product form and equivalent designation |
How to Select the Right Product Form
- Use pipe and tube pages when the enquiry is controlled by OD or NPS, wall thickness, schedule, construction method and pressure or heat-transfer service.
- Use plate and sheet pages when thickness, width, length, finish, forming and fabrication are the main buying variables.
- Use bar pages when diameter or section, condition, tolerance, machining and heat treatment control the requirement.
- Use flange and fitting pages when the design is controlled by size, pressure class, facing, schedule, joint type and piping code.
- Use component pages for drawing-based parts with defined tolerances, inspection and end-use information.
Industries We Serve
- Architecture and facades: Sheets and plates for exposed cladding, screens and features where drainage and wet-dry cycling are designed.
- Bridges and infrastructure: A588, A242 or EN weathering plate for approved structural designs and exposure categories.
- Railways: IRSM 41-97 plate for wagons and railway applications under the applicable specification.
- Art and landscaping: Weathering sheet and plate for sculptures and outdoor elements with runoff and staining controls.
- Heat exchangers and industrial equipment: ASTM A423 Grade 1 tubes where the tube standard and service conditions are specified.
- Transport and containers: Weathering grades for selected fabricated bodies and outdoor structures after design review.
Testing and Documentation
Testing and documentation should be agreed before quotation. Depending on the product standard and project, the requirement may include a mill test certificate, heat-number traceability, chemical and mechanical test results, dimensional inspection, positive material identification, non-destructive examination, pressure testing, impact testing, surface or coating records and third-party inspection. Lakshya Steel should publish only the services that are confirmed for the selected product and supply route.
Prepare a Clear Enquiry
- Material or grade
- Product form and governing standard
- Dimensions, thickness, wall, schedule, section or pressure class
- Quantity and length
- Condition, temper, heat treatment or finish
- Testing, certificate and inspection requirement
- Drawing and tolerances for components
- Delivery destination and end use
Frequently Asked Questions About Corten Steel Products
1. Is Corten steel the same as weathering steel?
Weathering steel is the generic family. COR-TEN is a registered trademark associated with specific licensed grades. Supplier pages should use the trademark accurately and should not describe every ASTM or EN weathering grade as identical to branded COR-TEN without checking the mill certificate and equivalent specification.
2. How does weathering steel develop its protective patina?
The surface changes through repeated wet and dry exposure, allowing a dense oxide layer to develop under suitable conditions. Continuously wet, sheltered, buried, marine-salt or heavily polluted environments may not produce a stable patina. Drainage, orientation, joints and runoff staining need design attention.
3. Which weathering steel grade should I choose?
Choose by the governing structural or product standard, required yield strength, thickness, impact test, product form and environment. ASTM A242 and A588 serve structural applications, EN 10025-5 covers European weathering grades, IRSM 41-97 serves defined railway use and ASTM A423 covers tube products.
4. Can weathering steel be welded and formed?
Weathering grades can generally be fabricated using grade-specific procedures. Filler metal, heat input, joint design, preheat and matching weathering performance depend on thickness and standard. The fabricator should use the mill data sheet and approved welding procedure rather than a generic Corten procedure.
5. What should be included in a weathering steel enquiry?
State the exact grade and standard, plate or tube form, thickness or wall, dimensions, quantity, impact requirement, surface condition, fabrication need and delivery destination. Also describe the end use and exposure so the supplier can flag whether uncoated weathering steel is appropriate.
Request A Quote
