Titanium Grade 5 is usually selected when a project needs more strength without adding unnecessary weight. Lakshya International supplies Titanium Grade 5 products for applications where high strength, corrosion resistance and a strong strength-to-weight ratio matter. Also known as Ti-6Al-4V, this alpha-beta titanium alloy contains aluminium and vanadium to provide considerably higher mechanical strength than commercially pure titanium grades. It is commonly used in demanding aerospace, marine, medical and industrial applications where material performance is important.
For the wider material range, explore Titanium Products and compare Titanium Grade 2 Products where corrosion resistance and formability are the main selection priorities.
Titanium Grade 5 Product Range
Lakshya’s Grade 5 range includes plates/sheets, rods, pipes, flanges and tubes. Each product form should be selected according to dimensions, applicable standard, quantity and service requirements.
Titanium Grade 5 Plates / Sheets
Titanium Grade 5 Rods Manufacturer
Titanium Grade 5 Pipes Supplier
Titanium Gr 5 Threaded Flanges
Titanium Grade 5 Tubes Exporter
- Titanium Grade 5 vs Titanium Grade 2
- Titanium Grade 5 Specifications & Equivalent Grades
- Titanium Grade 5 Chemical Composition
- Titanium Grade 5 Mechanical Properties
- Titanium Grade 5 Physical Properties
- Common Titanium Grade 5 Standards
Titanium Grade 5 vs Titanium Grade 2
|
Property |
Titanium Grade 2 |
Titanium Grade 5 |
|
Material type |
Commercially pure titanium |
Ti-6Al-4V alloy |
|
Strength |
Lower |
Much higher |
|
Formability |
Higher |
Lower than Grade 2 |
|
Corrosion resistance |
Excellent |
Excellent |
|
Weight |
Lightweight |
Lightweight |
|
Typical selection |
Corrosion resistance + formability |
Strength + weight efficiency |
|
Common applications |
Piping, chemical service |
Aerospace, marine, medical, industrial |
Titanium Grade 5 Specifications & Equivalent Grades
|
Standard |
Designation |
|
Titanium Grade |
Grade 5 |
|
Alloy |
Ti-6Al-4V |
|
UNS |
R56400 |
|
Werkstoff |
3.7165 |
Titanium Grade 5 Chemical Composition
|
Element |
Reference Composition |
|
Titanium |
Balance |
|
Aluminium |
5.5–6.75% |
|
Vanadium |
3.5–4.5% |
|
Iron |
≤ 0.40% |
|
Oxygen |
≤ 0.20% |
|
Carbon |
≤ 0.10% |
|
Nitrogen |
≤ 0.05% |
|
Hydrogen |
≤ 0.015% |
Titanium Grade 5 Mechanical Properties
|
Property |
Reference Value |
Note |
|
Tensile Strength |
895 MPa min. |
Verify by product standard and material condition. |
|
Yield Strength |
828 MPa min. |
Verify by product standard and material condition. |
|
Elongation |
10% min. |
Verify by product standard and material condition. |
|
Density |
4.43 g/cm³ |
Typical reference value. |
|
Melting Point |
Approx. 1632°C |
Typical reference value. |
Titanium Grade 5 Physical Properties
|
Property |
Reference Value |
|
Density |
4.43 g/cm³ |
|
Melting Point |
Approx. 1632°C |
|
Modulus of Elasticity |
Approx. 114 GPa |
|
Thermal Conductivity |
Approx. 20 W/m·°C |
|
Poisson’s Ratio |
Approx. 0.33 |
Common Titanium Grade 5 Standards
|
Product |
Common Standard |
|
Plates / Sheets |
ASTM B265 |
|
Rods / Bars |
ASTM B348 |
|
Forgings / Flanges |
ASTM B381 / ASME SB381 |
|
Tubes |
ASTM B338 |
|
Pipes |
ASTM B337 / B861 depending on product |
Why Choose Titanium Grade 5?
Titanium Grade 5 is often considered when commercially pure titanium grades do not provide enough mechanical strength for the application.
- High strength-to-weight ratio
- Lower density than steel
- Excellent corrosion resistance
- Good mechanical strength
- Suitable for demanding service conditions
- Useful combination of strength and corrosion resistance
- Available in multiple product forms
- Widely used in aerospace, marine, medical and industrial applications
Titanium Grade 5 Applications
Aerospace
- Aircraft structural components
- Engine-related components
- Aerospace fasteners
- Weight-sensitive structures
Marine & Offshore
- Marine components
- Subsea equipment
- Seawater-service components
Medical
- Surgical components
- Orthopedic applications
- Medical implants
Industrial
- Chemical processing equipment
- Process components
- High-performance mechanical parts
- Oil & gas equipment
Which Titanium Grade 5 Product Do You Need?
| Requirement | Recommended Product |
| Flat structural material | Grade 5 Plates / Sheets |
| Machined components | Grade 5 Rods / Bars |
| Piping systems | Grade 5 Pipes |
| Pipe connections | Grade 5 Flanges |
| Heat exchanger / tubular applications | Grade 5 Tubes |
Titanium Grade 5 Supply Process
| Step | Process |
| 1. Requirement | Grade + product + dimensions |
| 2. Technical Review | Standard + specification + condition |
| 3. Quotation | Quantity + pricing + delivery |
| 4. Manufacturing / Sourcing | Production or sourcing according to requirement |
| 5. Quality Inspection | Dimensions + testing + documentation |
| 6. Packing | Protective industrial packaging |
| 7. Dispatch | Domestic / international delivery |
Titanium Grade 5 Price
The price of Titanium Grade 5 depends on product form, dimensions, quantity, applicable standard, material condition, testing requirements and current titanium market conditions. For an accurate quotation, share the required grade, product type, dimensions, quantity and applicable specification with Lakshya International.
Ready to Source Titanium Grade 5?
Share your Titanium Grade 5 requirement with Lakshya International for a project-specific quotation.
