Titanium Grade 2 Products Manufacturer & Supplier

Home » Titanium Grade 2 Products

Lakshya International supplies Titanium Grade 2 products for applications where corrosion resistance, formability, ductility and a useful strength-to-weight balance are important. Titanium Grade 2 is commercially pure titanium and is commonly identified as UNS R50400 and DIN/Werkstoff 3.7035. It is used across industrial environments where the material needs to withstand corrosive service while remaining relatively light and workable.

Lakshya’s current Titanium Grade 2 range includes plates/sheets, rods, pipes, flanges and seamless tubes. Each product form has different dimensional and manufacturing requirements, so the correct specification should be selected according to the application, size, standard, quantity and required condition.

For a quotation, share the Grade 2 designation, product form, dimensions, quantity, applicable ASTM/ASME or other standard, finish or condition and any inspection or documentation requirements.

For related material options, explore Titanium Products or compare Titanium Grade 5 Products when higher strength is required.

Titanium Grade 2 Product Range

Titanium Grade 2 Plates/Sheets

Titanium Grade 2 Rods

Titanium Grade 2 Pipes

Titanium Grade 2 Flanges

Titanium Grade 2 Seamless Tubes

What Is Titanium Grade 2?

Titanium Grade 2 is a commercially pure titanium grade rather than an alloy such as Grade 5. It is commonly called CP Titanium Grade 2, Ti Grade 2, UNS R50400 and DIN/Werkstoff 3.7035.

Titanium Grade 2 Specifications & Equivalent Grades

System	Designation
UNS	R50400
DIN / Werkstoff	3.7035
British	TA2
Common names	CP Titanium, Ti Grade 2, TA2

Titanium Grade 2 Chemical Composition

Element	Reference
Titanium	Balance / 99.2% minimum
Carbon	0.100% max
Iron	0.300% max
Hydrogen	0.015% max
Nitrogen	0.030% max
Oxygen	0.250% max

Titanium Grade 2 Mechanical Properties

Property	Competitor reference	Note
Yield strength	345 MPa min.	Verify by product standard/condition.
Tensile strength	485 MPa min.	Verify by product standard/condition.
Elongation	28% min.	Verify by product standard/condition.
Hardness	160–200 HV	Verify by product standard/condition.

Titanium Grade 2 Physical Properties

Property	Competitor reference
Density	4.5 g/cm³
Modulus of elasticity	100 GPa
Thermal conductivity	20 W/m°C
Shear modulus	39 GPa
Poisson’s ratio	0.32

Titanium Grade 2 vs Titanium Grade 5

Commonly identified as UNS R50400 and DIN/Werkstoff 3.7035.
Available in multiple product forms.
Relatively low density and a useful strength-to-weight balance.
Useful ductility and formability for fabrication.
Good corrosion resistance for suitable industrial and marine environments.
Commercially pure titanium with high titanium content.

Why Choose Titanium Grade 2?

Quality

Products supplied according to applicable specifications and requirements.

Wide product range

Available in multiple product forms, sizes and specifications.

Technical expertise

Support for selecting the right grade, product form and specification.

Quality documentation

Testing and material documentation available as required.

Custom requirements

Solutions based on dimensions, quantity, standards and application needs.

Reliable supply

Focused on consistent sourcing, packaging and delivery requirements.

Titanium Grade 2 Applications

Marine and offshore equipment
Aeronautical applications
Chemical and corrosive-service equipment
Heat exchangers and process equipment
Piping, tubes and fabricated components
Selected industrial applications

Marine, offshore and aeronautical applications are specifically identified by the competitor; Lakshya’s Grade 2 pipe and plate pages also position the material for corrosive and industrial service.

Factor	Grade 2	Grade 5
Material	Commercially pure titanium	Ti-6Al-4V alloy
Primary selection	Corrosion resistance, ductility, formability	Higher strength / heat resistance
Typical use direction	Corrosive-service and formable components	Higher-strength engineering/aerospace components
Internal link	Titanium Grade 2 Products	Titanium Grade 5 Products

Titanium Grade 2 Price

Price depends on product form, dimensions, quantity, finish, manufacturing route, standard, testing, documentation and current market conditions. The competitor currently publishes ₹2,200/kg and $27.5/kg, but Lakshya should not copy that fixed figure unless it has been commercially verified and kept current.

Frequently Asked Questions

What information should I provide when requesting a Titanium Grade 2 quote?

Provide the Titanium Grade 2 designation or UNS number, required product form, dimensions, quantity, applicable ASTM, ASME or other material standard, finish or material condition, and any inspection, testing or documentation requirements.

Which Titanium Grade 2 product forms can I request from Lakshya International?

Lakshya's current Titanium Grade 2 range includes plates and sheets, rods, pipes, flanges and seamless tubes. The required product form should be specified along with its dimensions and quantity.

What details are required for Titanium Grade 2 plates or sheets?

Share the required thickness, width, length, quantity, applicable standard, surface finish or condition and any testing or inspection requirements.

What details are required for Titanium Grade 2 rods, pipes or tubes?

Provide the required diameter or outside and inside diameter, wall thickness, length, quantity, applicable standard, material condition and any testing or documentation requirements.

Can I request inspection certificates or material test certificates for Titanium Grade 2?

Yes, inspection and material documentation requirements can be included in the enquiry. Specify the required certificates, testing and inspection requirements when requesting a quotation.

How can I request a quote for Titanium Grade 2 products?

Use the Request a Quote page and provide the grade, product form, dimensions, quantity, applicable standard and any testing or documentation requirements so the quotation can be prepared accurately.

What is Titanium Grade 2?

A commercially pure titanium grade commonly identified as UNS R50400 and DIN/Werkstoff 3.7035.

What is the UNS number of Titanium Grade 2?

UNS R50400.

What is the Werkstoff number of Titanium Grade 2?

3.7035.

What products are available in Grade 2?

Lakshya's current hub lists plates/sheets, rods, pipes, flanges and seamless tubes.

Where is Titanium Grade 2 used?

The cited sources identify marine, offshore, aeronautical and corrosion-resistant industrial applications.

What is the difference between Grade 2 and Grade 5 titanium?

Grade 2 is commercially pure titanium focused on corrosion resistance, ductility and formability; Grade 5 is a higher-strength Ti-6Al-4V alloy.

What affects Grade 2 titanium price?

Product form, dimensions, quantity, standard, finish, testing/documentation and market conditions.

What standards apply to Grade 2?

The standard depends on the product form; Lakshya's individual pages reference different standards for plates, rods, pipes and tubes.