ASME SA335 Alloy Steel P12 Seamless Pipes / Alloy Steel P12 Fabricated Pipes
Table of Content
- ASME SA335 Alloy Steel P12 Seamless Pipes Specification:
- ASME SA335 Alloy Steel P12 Seamless Pipes Chemical Composition
- ASME SA335 Alloy Steel P12 Seamless Pipes Mechanical properties
- ASME SA335 Alloy Steel P12 Seamless Pipes Equivalent Grades
- Alloy Steel P12 Seamless Pipes Outside Diameter
- Wall thickness of Grade P12 Seamless Pipe
- ASME SA335 Alloy Steel P12 Seamless Pipes Types
Information
Alloy Steel EN 13CrMo44 Seamless Pipes Suppliers, Alloy Steel Fabricated Alloy Steel ASTM A335 Pipes, Alloy Steel BS 3604 P12 620-440 ERW Pipes Supplier in India, Alloy Steel UNS K11562 Hydraulic Pipes, Alloy Steel P12 Coiled Pipes, Alloy Steel P12 Bush Hex Pipes Supplier & Exporter in India, ASTM A335 Grade P12 Alloy steel seamless Pipes Manufacturer Exporter and Suppliers, Alloy Steel P12 Seamless Pipes prices in India.
Alloy Steel Grade P12 Pipe, P12 Alloy Steel Pipes, Alloy Steel GR. P12 Seamless Round, Alloy Steel Rectangular Pipes, Alloy Steel Hydraulic Pipes, Alloy Steel Seamless Pipes, Alloy Steel P12 Hexagonal Pipe, Alloy Steel P12 Seamless Pipes, ANSI B 36.10, ASME SA335 Alloy Steel Pipe Suppliers and Exporters in India.
ASTM A335 Grade P12 Seamless Pipe
Lakshya International is one of the prominent manufacturers, Stockist, trader, Supplier and Exporter of ASTM A335 grade P12 Pipe that is being developed and designed in accordance with international quality standards.
These Alloy Steel P12 EFW Pipes offered by us are widely used by a number of satisfied customers. Heat input in our Alloy Steel P12 Welded Pipes should also be low enough that the total time for the HAZ in the 1300 Degree F – 1800 Degree F range will not be sufficient for precipitation of intermetallic phases. Post – weld cleaning by chemical or mechanical plus chemical means for removal of heat tint, weld spatter, or other contamination is strongly recommended for these SA335 P12 Alloy Steel Pipe. Welding procedures in our Alloy Steel P12 ERW Pipes should be qualified for primary welds and permitted repairs, using tests such as those in ASTM standard for qualification. Welding should be performed only by welders qualified for these Alloy Steel P12 Round Pipes, where such treatment applies to both solution annealing and stress relieving.
We Designed A335 P12 Welded Pipe as per international and national standards, these P12 Seamless Pipe are offered in customized length sizes and shapes to our esteemed clients. Also referred to as ASTM A335 P12 Alloy Steel Pipe, we offer these Carbon Seamless Pipes at best possible rates in the market.
CITIES WE DELIVERED
New York City, Los Angeles, Chicago, Houston, Phoenix, Philadelphia, San Antonio, San Diego, Dallas, San Jose, Austin, Jacksonville, Fort Worth, Columbus, Charlotte, San Francisco, Indianapolis, Seattle, Denver, Washington, Boston, El Paso, Nashville, Detroit, Oklahoma City, Portland, Las Vegas, Memphis, Louisville, Baltimore, Milwaukee, Albuquerque, Tucson, Fresno, Mesa, Sacramento, Atlanta, Kansas City, Colorado Springs, Omaha, Raleigh, Miami, Long Beach, Virginia Beach, Oakland, Minneapolis, Tulsa, Tampa, Arlington, New Orleans, Wichita, Bakersfield, Cleveland, Aurora, Anaheim, Honolulu, Santa Ana, Riverside, Corpus Christi, Lexington, Henderson, Stockton, Saint Paul, Cincinnati, St. Louis, Pittsburgh, Greensboro, Lincoln, Anchorage, Plano, Orlando, Irvine, Newark, Durham, Chula Vista, Toledo, Fort Wayne, St. Petersburg, Laredo, Jersey City, Chandler, Madison, Lubbock, Scottsdale, Reno, Buffalo, Gilbert, Glendale, North Las Vegas, Winston-Salem, Chesapeake, Norfolk, Fremont, Garland, Irving, Hialeah, Richmond, Boise, Spokane, Baton Rouge, Tacoma, San Bernardino, Modesto, Fontana, Des Moines, Moreno Valley, Santa Clarita, Fayetteville, Birmingham, Oxnard, Rochester, Port St. Lucie, Grand Rapids, Huntsville, Salt Lake City, Frisco, Yonkers, Amarillo, Glendale, Huntington Beach, McKinney, Montgomery, Augusta, Aurora, Akron, Little Rock, Tempe, Columbus, Overland Park, Grand Prairie, Tallahassee, Cape Coral, Mobile, Knoxville, Shreveport, Worcester, Ontario, Vancouver, Sioux Falls, Chattanooga, Brownsville, Fort Lauderdale, Providence, Newport News, Rancho Cucamonga, Santa Rosa, Peoria, Oceanside, Elk Grove, Salem, Pembroke Pines, Eugene, Garden Grove, Cary, Fort Collins, Corona, Springfield, Jackson, Alexandria, Hayward, Clarksville, Lakewood, Lancaster, Salinas, Palmdale, Hollywood, Springfield, Macon, Kansas City, Sunnyvale, Pomona, Killeen, Escondido, Pasadena, Naperville, Bellevue, Joliet, Murfreesboro, Midland, Rockford, Paterson, Savannah, Bridgeport, Torrance, McAllen, Syracuse, Surprise, Denton, Roseville, Thornton, Miramar, Pasadena, Mesquite, Olathe, Dayton, Carrollton, Waco, Orange, Fullerton, Charleston, West Valley City, Visalia, Hampton, Gainesville, Warren, Coral Springs, Cedar Rapids, Round Rock, Sterling Heights, Kent, Columbia, Santa Clara, New Haven, Stamford, Concord, Elizabeth, Athens, Thousand Oaks, Lafayette, Simi Valley, Topeka, Norman, Fargo, Wilmington, Abilene, Odessa, Columbia, Pearland, Victorville, Hartford, Vallejo, Allentown, Berkeley, Richardson, Arvada, Ann Arbor, Rochester, Cambridge, Sugar Land, Lansing, Evansville, College Station, Fairfield, Clearwater, Beaumont, Independence, Provo, West Jordan, Murrieta, Palm Bay, El Monte, Carlsbad, North Charleston, Temecula, Clovis, Springfield, Meridian, Westminster, Costa Mesa, High Point, Manchester, Pueblo, Lakeland, Pompano Beach, West Palm Beach, Antioch, Everett, Downey, Lowell, Centennial, Elgin, Richmond, Peoria, Broken Arrow, Miami Gardens, Billings, Jurupa Valley, Sandy Springs, Gresham, Lewisville, Hillsboro, Ventura, Greeley, Inglewood, Waterbury, League City, Santa Maria, Tyler, Davie, Lakewood, Daly City, Boulder, Allen, West Covina, Sparks, Wichita Falls, Green Bay, San Mateo, Norwalk, Rialto, Las Cruces, Chico, El Cajon, Burbank, South Bend, Renton, Vista, Davenport, Edinburg, Tuscaloosa, Carmel, Spokane Valley, San Angelo, Vacaville, Clinton, Bend, Woodbridge.
ASTM A335 Grade P12 Seamless Pipe Specifications :
Specifications |
: |
ASTM A 335 ASME SA 335 |
Dimensions |
: |
ASTM, ASME and API |
Size |
: |
1/8″NB TO 30″NB IN |
Schedule |
: |
SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
Length |
: |
Within 13500mm |
Type |
: |
Seamless / Fabricated |
Form |
: |
Round, Hydraulic Etc |
Length |
: |
Single Random, Double Random & Cut Length. |
End |
: |
Plain End, Beveled End, Treaded |
SA335 P12 material Chemical Composition Chart :
C, % |
Mn, % |
P, % |
S, % |
Si, % |
Cr, % |
Mo, % |
0.15 max |
0.30-0.60 |
0.025 max |
0.025 max |
0.50-1.00 |
1.00-1.50 |
0.44-0.65 |
ASME SA335 P12 Seamless Pipes Mechanical Properties :
Tensile Strength , MPa |
Yield Strength, MPa |
Elongation, % |
Hardness, HB |
415 min |
205 min |
30 min |
179 max |
ASTM A335 P12 Seamless Pipe Equivalent Standard :
ASME | Equivalent material | JIS G 3458 | UNS | BS | DIN | ISO | ABS | NK |
SA 213 P12 | P12 | STPA 22 | K11562 | 3604 P1 620-440 |
17175 13CrMo44 |
– | ABS 12 | KSTPA 22 |
ASME SA335 Grade P12 Pipe Outside Diameter :
Hot rolled |
Outside Diameter, mm |
Tolerance, mm |
OD≤101.6 |
+0.4/-0.8 |
|
101.6<OD≤190.5 |
+0.4/-1.2 |
|
190.5<OD≤228.6 |
+0.4/-1.6 |
|
Cold Drawn |
Outside Diameter, mm |
Tolerance, mm |
OD<25.4 |
±0.10 |
|
25.4≤OD≤38.1 |
±0.15 |
|
38.1<OD<50.8 |
±0.20 |
|
50.8≤OD<63.5 |
±0.25 |
|
63.5≤OD<76.2 |
±0.30 |
|
76.2≤OD≤101.6 |
±0.38 |
|
101.6<OD≤190.5 |
+0.38/-0.64 |
|
190.5<OD≤228.6 |
+0.38/-1.14 |
ASTM A335 Grade P12 Wall Thickness :
Hot rolled |
Outside Diameter, mm |
Tolerance, % |
OD≤101.6, WT≤2.4 |
+40/-0 |
|
OD≤101.6, 2.4<WT≤3.8 |
+35/-0 |
|
OD≤101.6, 3.8<WT≤4.6 |
+33/-0 |
|
OD≤101.6, WT>4.6 |
+28/-0 |
|
OD>101.6, 2.4<WT≤3.8 |
+35/-0 |
|
OD>101.6, 3.8<WT≤4.6 |
+33/-0 |
|
OD>101.6, WT>4.6 |
+28/-0 |
|
Cold Drawn |
Outside Diameter, mm |
Tolerance, % |
OD≤38.1 |
+20/-0 |
|
OD>38.1 |
+22/-0 |
SA335 P12 Material Thermal Expansion :
Breed | Specification | Grade steel / steel | Implementation of standards | |
---|---|---|---|---|
OD mm | Wall thickness mm | |||
Low and medium pressure boiler pipe | 48-1200 | 5-30 | 10 # | GB3087 |
20 # | ||||
High Pressure Boiler Tube | 48-457 | 3.91-57 | 20G | GB5310 |
20MnG | ||||
25MnG | ||||
15MoG | ||||
20MoG | ||||
15CrMoG | ||||
12Cr1MoVG/13CrMo44/13CrMo4-5 | ||||
ST35.8/ST45.8 | DIN17175 | |||
SA106A/B/C | ASME SA106 ASME SA210 ASME SA213 ASME SA335 | |||
SA210A/B/C | ||||
T2/P2 | ||||
T11/P11 | ||||
T12/P12 | ||||
T22/P22 | ||||
T91/P91 | ||||
Nuclear power tube | 48-711 | 3.91-57 | 20 control Cr/P22/WB36CN1/A106B/P11 | GB5310 ASTM A106 ASTM A335 |
P12 Alloy Steel Seamless Pipe Weight chart :
Size NPS | Pipe O.D. | Wall Thickness | Pipe I.D. | Weight per Foot | Standard to XXHY | Schedule Pipe # |
Section Modulus | Gallon Capacity Per Linear Foot |
1/2 | 0.84 | 0.109 | 0.622 | 0.85 | STD | 40 | .0407 | .0158 |
0.147 | 0.546 | 1.09 | XHY | 80 | .0478 | .0122 | ||
0.188 | 0.464 | 1.31 | 160 | .0528 | .0088 | |||
0.294 | 0.252 | 1.72 | XXHY | .0577 | .0026 | |||
3/4 | 1.05 | 0.113 | 0.824 | 1.13 | STD | 40 | .0705 | .0277 |
0.154 | 0.742 | 1.48 | XHY | 80 | .0853 | .0225 | ||
0.219 | 0.612 | 1.95 | 160 | .1006 | .0153 | |||
0.308 | 0.434 | 2.44 | XXHY | .1103 | .0077 | |||
1 | 1.315 | 0.133 | 1.049 | 1.68 | STD | 40 | .1328 | .0449 |
0.179 | 0.957 | 2.17 | XHY | 80 | .1606 | .0374 | ||
0.250 | 0.815 | 2.85 | 160 | .1904 | .0271 | |||
0.358 | 0.599 | 3.66 | XXHY | .2136 | .0146 | |||
1 1/4 | 1.66 | 0.140 | 1.380 | 2.27 | STD | 40 | .2346 | .0777 |
0.191 | 1.278 | 3.00 | XHY | 80 | .2913 | .0666 | ||
0.250 | 1.160 | 3.77 | 160 | .3421 | .0549 | |||
0.382 | 0.896 | 5.22 | .4110 | .0328 | ||||
1 1/2 | 1.90 | 0.145 | 1.610 | 2.72 | STD | 40 | .3262 | .1058 |
0.200 | 1.500 | 3.63 | XHY | 80 | .4118 | .0918 | ||
0.281 | 1.338 | 4.86 | 160 | .5079 | .0730 | |||
0.400 | 1.100 | 6.41 | .5977 | .0494 | ||||
2 | 2.375 | 0.109 | 2.157 | 2.64 | 10 | .4205 | .1898 | |
0.154 | 2.067 | 3.66 | STD | 40 | .5606 | .1743 | ||
0.218 | 1.939 | 5.03 | XHY | 80 | .7309 | .1534 | ||
0.250 | 1.875 | 5.68 | .8045 | .1434 | ||||
0.281 | 1.813 | 6.29 | .8666 | .1344 | ||||
0.344 | 1.687 | 7.47 | 160 | .9806 | .1161 | |||
0.436 | 1.503 | 9.04 | XXHY | 1.1043 | .0922 | |||
2 1/2 | 2.875 | 0.120 | 2.635 | 3.53 | 10 | .6870 | .2833 | |
0.203 | 2.469 | 5.80 | STD. | 40 | 1.0640 | .2487 | ||
0.216 | 2.443 | 6.14 | 1.1169 | .2435 | ||||
0.250 | 2.375 | 7.02 | 1.2468 | .2301 | ||||
0.276 | 2.323 | 7.67 | XHY | 80 | 1.3386 | .2202 | ||
0.375 | 2.125 | 10.02 | 160 | 1.6371 | .1842 | |||
0.552 | 1.771 | 13.71 | XXXHY | 1.9971 | .1280 | |||
3 | 3.50 | 0.120 | 3.260 | 4.34 | 1.0411 | .4336 | ||
0.156 | 3.188 | 5.58 | 1.3122 | .4147 | ||||
0.172 | 3.156 | 6.12 | 1.4265 | .4064 | ||||
0.188 | 3.124 | 6.66 | 1.5342 | .3984 | ||||
0.216 | 3.068 | 7.58 | STD. | 40 | 1.7241 | .3840 | ||
0.250 | 3.000 | 8.69 | 1.9372 | .3672 | ||||
0.281 | 2.938 | 9.67 | 2.1207 | .3521 | ||||
0.300 | 2.900 | 10.26 | XHY | 80 | 2.2253 | .3431 | ||
0.438 | 2.624 | 14.34 | 160 | 2.8774 | .2811 | |||
0.600 | 2.300 | 18.6 | XXHY | 3.4243 | .2158 | |||
3 1/2 | 4.0 | 0.120 | 3.760 | 4.98 | 10 | 1.3776 | .5768 | |
0.226 | 3.548 | 9.12 | STD. | 140 | 2.3939 | .5136 | ||
0.250 | 3.500 | 10.02 | 2.6001 | .4998 | ||||
0.281 | 3.438 | 11.17 | 2.8562 | .4821 | ||||
0.318 | 3.364 | 12.52 | XHY | 80 | 3.1400 | .4617 | ||
0.636 | 2..728 | 22.87 | XXHY | 4.8795 | .3085 | |||
4 | 4.5 | 0.120 | 4.260 | 5.62 | 10 | 1.7612 | .7404 | |
0.156 | 4.188 | 7.24 | 2.2354 | .7156 | ||||
0.188 | 4.124 | 8.67 | 2.6296 | .6942 | ||||
0.203 | 4.094 | 9.32 | 2.8173 | .6838 | ||||
0.219 | 4.062 | 10.02 | 3.0184 | .6725 | ||||
0.237 | 4.026 | 10.80 | STD. | 40 | 3.2145 | .6613 | ||
0.250 | 4.000 | 11.36 | 3.3611 | .6528 | ||||
0.281 | 3.938 | 12.67 | 60 | 3.7021 | .6326 | |||
0.312 | 3.876 | 13.97 | 4.0273 | .6126 | ||||
0.337 | 3.826 | 15.00 | XHY | 80 | 4.2713 | .5972 | ||
0.438 | 3.624 | 19.02 | 120 | 5.1790 | .5361 | |||
0.531 | 3.438 | 22.53 | 160 | 5.8997 | .4822 | |||
0.674 | 3.152 | 27.57 | XXHY | 6.7927 | .4054 | |||
5 | 5.563 | 0.188 | 5.187 | 10.80 | 4.1161 | 1.0979 | ||
0.219 | 5.125 | 12.51 | 4.7279 | 1.0716 | ||||
0.258 | 5.047 | 14.63 | STD. | 40 | 5.4500 | 1.0391 | ||
0.281 | 5.001 | 15.87 | 5.8644 | 1.0204 | ||||
0.312 | 4.939 | 17.51 | 6.4074 | .99647 | ||||
0.344 | 4.875 | 19.19 | 6.9358 | .9696 | ||||
0.375 | 4.813 | 20.80 | XHY | 80 | 7.4300 | .9449 | ||
0.500 | 4.563 | 27.06 | 120 | 9.2534 | .8495 | |||
0.625 | 4.313 | 32.99 | 160 | 10.7976 | .7590 | |||
0.750 | 4.063 | 38.59 | XXHY | 12.0954 | .6734 | |||
6 | 6.625 | 0.109 | 6.407 | 7.59 | 5 | 3.5769 | 1.6748 | |
0.134 | 6.357 | 9.30 | 10 | 4.3475 | 1.6488 | |||
0.156 | 6.313 | 10.79 | 5.0107 | 1.6260 | ||||
0.188 | 6.249 | 12.94 | 5.9351 | 1.5937 | ||||
0.203 | 6.219 | 13.94 | 6.3804 | 1.5780 | ||||
0.219 | 6.187 | 15.00 | 6.8261 | 1.5620 | ||||
0.250 | 6.125 | 17.04 | 7.6905 | 1.5306 | ||||
0.280 | 6.065 | 18.99 | STD. | 40 | 8.4958 | 1.5008 | ||
0.312 | 6.001 | 21.06 | 9.3416 | 1.4688 | ||||
0.344 | 5.937 | 23.10 | 10.111 | 1.4391 | ||||
0.375 | 5.875 | 25.05 | 10.893 | 1.4082 | ||||
0.432 | 5.761 | 28.60 | XHY | 80 | 12.224 | 1.3541 | ||
0.500 | 5.625 | 32.74 | 13.711 | 1.2909 | ||||
0.562 | 5.501 | 36.43 | 120 | 14.9806 | 1.2346 | |||
0.625 | 5.375 | 40.09 | 16.1821 | 1.1787 | ||||
0.719 | 5.187 | 45.39 | 160 | 17.8243 | 1.0977 | |||
0.864 | 4.897 | 53.21 | XXHY | 20.025 | .9784 | |||
1.000 | 4.625 | 60.13 | 21.7719 | .8727 | ||||
1.125 | 4.375 | 66.14 | 23.1237 | .7809 |
A335 gr P12 Welded Pipe Size Chart In Mm :
Size NPS | Pipe O.D. | Wall Thickness | Pipe I.D. | Weight per Foot | Standard to XXHY | Schedule Pipe # |
Section Modulus | Gallon Capacity Per Linear Foot |
1/2 | 0.84 | 0.109 | 0.622 | 0.85 | STD | 40 | .0407 | .0158 |
0.147 | 0.546 | 1.09 | XHY | 80 | .0478 | .0122 | ||
0.188 | 0.464 | 1.31 | 160 | .0528 | .0088 | |||
0.294 | 0.252 | 1.72 | XXHY | .0577 | .0026 | |||
3/4 | 1.05 | 0.113 | 0.824 | 1.13 | STD | 40 | .0705 | .0277 |
0.154 | 0.742 | 1.48 | XHY | 80 | .0853 | .0225 | ||
0.219 | 0.612 | 1.95 | 160 | .1006 | .0153 | |||
0.308 | 0.434 | 2.44 | XXHY | .1103 | .0077 | |||
1 | 1.315 | 0.133 | 1.049 | 1.68 | STD | 40 | .1328 | .0449 |
0.179 | 0.957 | 2.17 | XHY | 80 | .1606 | .0374 | ||
0.250 | 0.815 | 2.85 | 160 | .1904 | .0271 | |||
0.358 | 0.599 | 3.66 | XXHY | .2136 | .0146 | |||
1 1/4 | 1.66 | 0.140 | 1.380 | 2.27 | STD | 40 | .2346 | .0777 |
0.191 | 1.278 | 3.00 | XHY | 80 | .2913 | .0666 | ||
0.250 | 1.160 | 3.77 | 160 | .3421 | .0549 | |||
0.382 | 0.896 | 5.22 | .4110 | .0328 | ||||
1 1/2 | 1.90 | 0.145 | 1.610 | 2.72 | STD | 40 | .3262 | .1058 |
0.200 | 1.500 | 3.63 | XHY | 80 | .4118 | .0918 | ||
0.281 | 1.338 | 4.86 | 160 | .5079 | .0730 | |||
0.400 | 1.100 | 6.41 | .5977 | .0494 | ||||
2 | 2.375 | 0.109 | 2.157 | 2.64 | 10 | .4205 | .1898 | |
0.154 | 2.067 | 3.66 | STD | 40 | .5606 | .1743 | ||
0.218 | 1.939 | 5.03 | XHY | 80 | .7309 | .1534 | ||
0.250 | 1.875 | 5.68 | .8045 | .1434 | ||||
0.281 | 1.813 | 6.29 | .8666 | .1344 | ||||
0.344 | 1.687 | 7.47 | 160 | .9806 | .1161 | |||
0.436 | 1.503 | 9.04 | XXHY | 1.1043 | .0922 | |||
2 1/2 | 2.875 | 0.120 | 2.635 | 3.53 | 10 | .6870 | .2833 | |
0.203 | 2.469 | 5.80 | STD. | 40 | 1.0640 | .2487 | ||
0.216 | 2.443 | 6.14 | 1.1169 | .2435 | ||||
0.250 | 2.375 | 7.02 | 1.2468 | .2301 | ||||
0.276 | 2.323 | 7.67 | XHY | 80 | 1.3386 | .2202 | ||
0.375 | 2.125 | 10.02 | 160 | 1.6371 | .1842 | |||
0.552 | 1.771 | 13.71 | XXXHY | 1.9971 | .1280 | |||
3 | 3.50 | 0.120 | 3.260 | 4.34 | 1.0411 | .4336 | ||
0.156 | 3.188 | 5.58 | 1.3122 | .4147 | ||||
0.172 | 3.156 | 6.12 | 1.4265 | .4064 | ||||
0.188 | 3.124 | 6.66 | 1.5342 | .3984 | ||||
0.216 | 3.068 | 7.58 | STD. | 40 | 1.7241 | .3840 | ||
0.250 | 3.000 | 8.69 | 1.9372 | .3672 | ||||
0.281 | 2.938 | 9.67 | 2.1207 | .3521 | ||||
0.300 | 2.900 | 10.26 | XHY | 80 | 2.2253 | .3431 | ||
0.438 | 2.624 | 14.34 | 160 | 2.8774 | .2811 | |||
0.600 | 2.300 | 18.6 | XXHY | 3.4243 | .2158 | |||
3 1/2 | 4.0 | 0.120 | 3.760 | 4.98 | 10 | 1.3776 | .5768 | |
0.226 | 3.548 | 9.12 | STD. | 140 | 2.3939 | .5136 | ||
0.250 | 3.500 | 10.02 | 2.6001 | .4998 | ||||
0.281 | 3.438 | 11.17 | 2.8562 | .4821 | ||||
0.318 | 3.364 | 12.52 | XHY | 80 | 3.1400 | .4617 | ||
0.636 | 2..728 | 22.87 | XXHY | 4.8795 | .3085 | |||
4 | 4.5 | 0.120 | 4.260 | 5.62 | 10 | 1.7612 | .7404 | |
0.156 | 4.188 | 7.24 | 2.2354 | .7156 | ||||
0.188 | 4.124 | 8.67 | 2.6296 | .6942 | ||||
0.203 | 4.094 | 9.32 | 2.8173 | .6838 | ||||
0.219 | 4.062 | 10.02 | 3.0184 | .6725 | ||||
0.237 | 4.026 | 10.80 | STD. | 40 | 3.2145 | .6613 | ||
0.250 | 4.000 | 11.36 | 3.3611 | .6528 | ||||
0.281 | 3.938 | 12.67 | 60 | 3.7021 | .6326 | |||
0.312 | 3.876 | 13.97 | 4.0273 | .6126 | ||||
0.337 | 3.826 | 15.00 | XHY | 80 | 4.2713 | .5972 | ||
0.438 | 3.624 | 19.02 | 120 | 5.1790 | .5361 | |||
0.531 | 3.438 | 22.53 | 160 | 5.8997 | .4822 | |||
0.674 | 3.152 | 27.57 | XXHY | 6.7927 | .4054 | |||
5 | 5.563 | 0.188 | 5.187 | 10.80 | 4.1161 | 1.0979 | ||
0.219 | 5.125 | 12.51 | 4.7279 | 1.0716 | ||||
0.258 | 5.047 | 14.63 | STD. | 40 | 5.4500 | 1.0391 | ||
0.281 | 5.001 | 15.87 | 5.8644 | 1.0204 | ||||
0.312 | 4.939 | 17.51 | 6.4074 | .99647 | ||||
0.344 | 4.875 | 19.19 | 6.9358 | .9696 | ||||
0.375 | 4.813 | 20.80 | XHY | 80 | 7.4300 | .9449 | ||
0.500 | 4.563 | 27.06 | 120 | 9.2534 | .8495 | |||
0.625 | 4.313 | 32.99 | 160 | 10.7976 | .7590 | |||
0.750 | 4.063 | 38.59 | XXHY | 12.0954 | .6734 | |||
6 | 6.625 | 0.109 | 6.407 | 7.59 | 5 | 3.5769 | 1.6748 | |
0.134 | 6.357 | 9.30 | 10 | 4.3475 | 1.6488 | |||
0.156 | 6.313 | 10.79 | 5.0107 | 1.6260 | ||||
0.188 | 6.249 | 12.94 | 5.9351 | 1.5937 | ||||
0.203 | 6.219 | 13.94 | 6.3804 | 1.5780 | ||||
0.219 | 6.187 | 15.00 | 6.8261 | 1.5620 | ||||
0.250 | 6.125 | 17.04 | 7.6905 | 1.5306 | ||||
0.280 | 6.065 | 18.99 | STD. | 40 | 8.4958 | 1.5008 | ||
0.312 | 6.001 | 21.06 | 9.3416 | 1.4688 | ||||
0.344 | 5.937 | 23.10 | 10.111 | 1.4391 | ||||
0.375 | 5.875 | 25.05 | 10.893 | 1.4082 | ||||
0.432 | 5.761 | 28.60 | XHY | 80 | 12.224 | 1.3541 | ||
0.500 | 5.625 | 32.74 | 13.711 | 1.2909 | ||||
0.562 | 5.501 | 36.43 | 120 | 14.9806 | 1.2346 | |||
0.625 | 5.375 | 40.09 | 16.1821 | 1.1787 | ||||
0.719 | 5.187 | 45.39 | 160 | 17.8243 | 1.0977 | |||
0.864 | 4.897 | 53.21 | XXHY | 20.025 | .9784 | |||
1.000 | 4.625 | 60.13 | 21.7719 | .8727 | ||||
1.125 | 4.375 | 66.14 | 23.1237 | .7809 |
Types Of Alloy steel P12 Seamless Pipes :
Alloy Steel P12 Seamless Pipes |
P12 Alloy Steel A335 Pipe |
ASTM A335 grade P12 Seamless Pipes |
ASTM A335 P12 Alloy Steel Seamless Pipe |
High Pressure P12 Boiler Pipe |
ASME SA335 P12 Alloy Steel Rectangular Pipe |
Alloy Steel P12 Seamless Pipes |
Alloy Steel Gr P12 Heater Pipe |
ASME SA335 Alloy Steel P12 Seamless Pipe |
IBR Alloy Steel P12 Seamless Pipes |
Alloy Steel P12 Custom Pipes |
ASME SA / ASTM A335 P12 Seamless Pipes |
Alloy Steel Grade P12 Round Pipe |
ASME SA335 P12 Seamless Pipes Suppliers |
Alloy A335 P12 Seamless Square Pipe |
ASME SA335 P12 Alloy Steel Seamless Pipe |
AISI P12 ERW Pipe |
ASTM A335 P12 Seamless Pipes |
ASTM A335 P12 Boiler Pipe |
Tubo A335 P12 Seamless Pipe |
ASME SA335 P12 Seamless Alloy Pipe |
ASME SA335 P12 Seamless Pipes |
ASME SA335 P12 Material |
ASME SA335 Grade P12 Seamless Pipe |
ASME SA335 Grade P12 Seamless Pipe |
ASME SA335 Gr P12 Seamless Pipe |
ASME SA335 P12 Thermal Conductivity |
Astm A335 Grade P12 Seamless Pipe |
ASME SA335 Gr P12 Seamless Pipe |
ASME SA335 P12 Material |
Astm A335 Gr P12 Seamless Pipe |
ASME SA335 P12 Seamless Pipe |
Astm A335 P12 Seamless Pipe |
ASME SA335 P12 Piping |
ASME SA335 P12 Seamless Pipe |
ASTM A335 P12 Steel |
Astm A335 P12 Seamless Pipe |
ASTM A335 P12 Seamless Pipe Material |
ASTM A335 P12 Piping |
ASTM A335 P12 Seamless Pipes |
Our Products
Our Latest Blogs
Stainless Steel 304 Pipes Comprehensive Guide
Stainless steel is a top choice in many industries because of its strength, durability, and resistance to rust. Among the various types, Stainless Steel 304 is one of the most widely used due to its variety and ability. It’s particularly popular in piping...
Related Products
Send Us Message
Got a question? We'd love to hear from you. Send us a message & we'll respond as soon as possible.