ESR ALLOY STEEL PRODUCTS

EN26 Alloy Steel

Specification



Manufacturing Standards

Information

EN26 Alloy Steel, EN26 Bright Bars, EN26 Round Bar Supplier, EN26 Steel, Heat Treated bars of En26, EN26 Blocks, EN 26 Billets, Heat Treated bars of En26.

Detailed Information

Manufacturer & Supplier of EN26 Alloy Steel in Mumbai, India

EN26 is a 2.5 percent nickel, chromium, and molybdenum high hardenability, high tensile steel that is typically hardened and tempered in the tensile range of 1000 to 1150 Mpa (Condition V) Rc 31 to 38. High strength and toughness in large sections – similar to EN25 but with larger carbon content, making it particularly suitable for areas with high surface pressure.

EN26 can be flame or induction hardened, as well as nitrided, once it has been pre-hardened and tempered.

EN26 is widely utilized in a wide range of industries for applications requiring greater tensile and yield strength than 4140, 4340, or EN25 can give.

Axles, Connecting Rods, Die Holders, Hydraulic Shafts, Spindles, Motor Shafts, Pins, Rams, Rolls, Sockets, Tool Holders, Torsion Bars, and so on are examples of typical applications.

Lakshya International is a leading Alloy Steel manufacturer in India, We provide the best en26 Steel Round bar.

Cities We Delivered

New York City, Los Angeles, Chicago, Houston, Phoenix, Philadelphia, San Antonio, San Diego, Dallas, San Jose, Austin, Jacksonville, Fort Worth, Columbus, Charlotte, San Francisco, Indianapolis, Seattle, Denver, Washington, Boston, El Paso, Nashville, Detroit, Oklahoma City, Portland, Las Vegas, Memphis, Louisville, Baltimore, Milwaukee, Albuquerque, Tucson, Fresno, Mesa, Sacramento, Atlanta, Kansas City, Colorado Springs, Omaha, Raleigh, Miami, Long Beach, Virginia Beach, Oakland, Minneapolis, Tulsa, Tampa, Arlington, New Orleans, Wichita, Bakersfield, Cleveland, Aurora, Anaheim, Honolulu, Santa Ana, Riverside, Corpus Christi, Lexington, Henderson, Stockton, Saint Paul, Cincinnati, St. Louis, Pittsburgh, Greensboro, Lincoln, Anchorage, Plano, Orlando, Irvine, Newark, Durham, Chula Vista, Toledo, Fort Wayne, St. Petersburg, Laredo, Jersey City, Chandler, Madison, Lubbock, Scottsdale, Reno, Buffalo, Gilbert, Glendale, North Las Vegas, Winston-Salem, Chesapeake, Norfolk, Fremont, Garland, Irving, Hialeah, Richmond, Boise, Spokane, Baton Rouge, Tacoma, San Bernardino, Modesto, Fontana, Des Moines, Moreno Valley, Santa Clarita, Fayetteville, Birmingham, Oxnard, Rochester, Port St. Lucie, Grand Rapids, Huntsville, Salt Lake City, Frisco, Yonkers, Amarillo, Glendale, Huntington Beach, McKinney, Montgomery, Augusta, Aurora, Akron, Little Rock, Tempe, Columbus, Overland Park, Grand Prairie, Tallahassee, Cape Coral, Mobile, Knoxville, Shreveport, Worcester, Ontario, Vancouver, Sioux Falls, Chattanooga, Brownsville, Fort Lauderdale, Providence, Newport News, Rancho Cucamonga, Santa Rosa, Peoria, Oceanside, Elk Grove, Salem, Pembroke Pines, Eugene, Garden Grove, Cary, Fort Collins, Corona, Springfield, Jackson, Alexandria, Hayward, Clarksville, Lakewood, Lancaster, Salinas, Palmdale, Hollywood, Springfield, Macon, Kansas City, Sunnyvale, Pomona, Killeen, Escondido, Pasadena, Naperville, Bellevue, Joliet, Murfreesboro, Midland, Rockford, Paterson, Savannah, Bridgeport, Torrance, McAllen, Syracuse, Surprise, Denton, Roseville, Thornton, Miramar, Pasadena, Mesquite, Olathe, Dayton, Carrollton, Waco, Orange, Fullerton, Charleston, West Valley City, Visalia, Hampton, Gainesville, Warren, Coral Springs, Cedar Rapids, Round Rock, Sterling Heights, Kent, Columbia, Santa Clara, New Haven, Stamford, Concord, Elizabeth, Athens, Thousand Oaks, Lafayette, Simi Valley, Topeka, Norman, Fargo, Wilmington, Abilene, Odessa, Columbia, Pearland, Victorville, Hartford, Vallejo, Allentown, Berkeley, Richardson, Arvada, Ann Arbor, Rochester, Cambridge, Sugar Land, Lansing, Evansville, College Station, Fairfield, Clearwater, Beaumont, Independence, Provo, West Jordan, Murrieta, Palm Bay, El Monte, Carlsbad, North Charleston, Temecula, Clovis, Springfield, Meridian, Westminster, Costa Mesa, High Point, Manchester, Pueblo, Lakeland, Pompano Beach, West Palm Beach, Antioch, Everett, Downey, Lowell, Centennial, Elgin, Richmond, Peoria, Broken Arrow, Miami Gardens, Billings, Jurupa Valley, Sandy Springs, Gresham, Lewisville, Hillsboro, Ventura, Greeley, Inglewood, Waterbury, League City, Santa Maria, Tyler, Davie, Lakewood, Daly City, Boulder, Allen, West Covina, Sparks, Wichita Falls, Green Bay, San Mateo, Norwalk, Rialto, Las Cruces, Chico, El Cajon, Burbank, South Bend, Renton, Vista, Davenport, Edinburg, Tuscaloosa, Carmel, Spokane Valley, San Angelo, Vacaville, Clinton, Bend, Woodbridge.

Related Specifications

Australia

AS 1444-1996-X9940

Germany

W.Nr 1.6745 40NiMoCr10 4

Great Britain

BS970: PART 3: 1991 826M40

BS970: 1955 – EN26

Chemical Composition (Base Material)

	Min. %	Max %
Carbon	0.36	0.44
Silicon	0.10	0.40
Manganese	0.45	0.70
Nickel	2.30	2.80
Chromium	0.50	0.80
Molybdenum	0.45	0.66
Phosphorous	0	0.04
Sulphur	0	0.04

Mechanical Property Requirements

Mechanical Property Requirements for Steels in the Heat-Treated Condition for Black, Peeled, Turned or Ground Finish to AS1444-1996 X9940 and BS970 Part 3-1991 826M40
Mechanical Property Designation		U	U	*V	*V	W	W	X	Y	Z
Limited Ruling Section mm		250	150	250	150	250	150	150	150	100
Tensile Strength Mpa	Min	930	930	1000	1000	1080	1080	1150	1230	1550
	Max	1080	1080	1150	1150	1230	1230	1300	1380
0.2% Proof Stress Mpa	Min	725	740	820	835	910	925	1005	1080	1125
Elongation on 5.65√S0 %	Min	12	12	12	12	11	11	10	10	7
Izod Impact J	Min	34	47	34	47	27	40	34	34	13
Charpy Impact J	Min	28	42	28	42	22	35	28	28	11
Hardness Brinell HB	Min	269	269	293	293	311	311	341	363	444
	Max	331	331	352	352	375	375	401	429
*Material stocked generally in condition V.Check test certificate if critical for end-use.
Forging
Heat to 1150 oC – 1200 oC maximum, hold until temperature is uniform throughout the section, and commence forging immediately.Do not forge below 850 oC. Following forging operation the work piece should be cooled as slowly as possible in sand or dry lime etc..
Heat Treatment
Annealing
Heat to 790 oC – 840 oC, hold until temperature is uniform throughout the section, and cool in the furnace.
Flame or Induction Hardening
EN26 hardened and tempered bar can be further surface hardened by either the flame or induction hardening methods resulting in a case hardness in excess of Rc 50. Parts should be heated as quickly as possible to the austenitic temperature range (820 oC – 850 oC) and required case depth followed by an immediate oil or water quench, depending upon hardness required, workpiece size/shape, and quenching arrangements. Following quenching to hand warm, most components should be tempered between 150 oC – 200 oC to remove quenching stresses in the case. This will have little effect on case hardness.
Hardening
Heat to 820 oC – 850 oC, hold until temperature is uniform throughout the section, soak for 10 – 15 minutes per 25 mm section, and quench in oil, water, or polymer as required.*Temper immediately while still hand warm.
Nitriding
EN26 hardened and tempered bar can also be successfully nitrided, giving a surface hardness of up to Rc 60. Nitriding is carried out at 490 oC – 530 oC, followed by slow cooling (no quench) reducing the problem of distortion. Parts can therefore be machined to near final size, leaving a grinding allowance only. The tensile strength of the core is usually not affected since the nitriding temperature range is generally below the original tempering temperature employed.N.B. Nickel is inert to the action of nitrogen and in general resists its diffusion into steel, and this can result in a lower case hardness or longer nitriding cycle times for steels containing nickel such as EN26.
Stress Relieving
Heat to 640 oC – 660 oC, hold until temperature is uniform throughout the section, soak for 1 hour per 25 mm section, and cool in still air.
Tempering
Re-heat to 450 oC – 660 oC as required, hold until temperature is uniform throughout the section, soak for 1 hour per 25 mm of section, and cool in still air.N.B.Tempering should be avoided if possible within the range 250 oC – 450 oC due to temper brittleness.
Notes on Heat Treatment
Heating temperatures, rate of heating, cooling, and soaking times will vary due to factors such as work piece size/shape also furnace type employed, quenching medium, work piece transfer facilities, etc..Please consult your heat treater for the best results.
Machining
EN26 in the hardened and tempered as the supplied condition is still regarded as being readily machinable and operations such as turning and drilling etc. can be carried out satisfactorily using machine manufacturers, recommendations for suitable tool type – feeds, and speeds.
Welding
Welding of EN26 in the hardened and tempered condition (as normally supplied), is not recommended and should be avoided if at all possible, as the mechanical properties will be altered within the weld heat-affected zone. It is preferred that welding be carried out on EN26 while in the annealed condition and that the work piece, immediately on cooling to hand warm, is then stress relieved at 640 oC – 660 oC prior to hardening and tempering. If welding in the hardened and tempered condition is really necessary, then the work piece, immediately on cooling to hand warm, should be stress relieved at 15 oC below the original tempering temperature.
Welding Procedure
Welding of EN26 in whatever condition should always be carried out using low hydrogen electrodes – please consult your welding consumables supplier.
Suggested pre-heat temperature
Section			25 mm	40 mm	50 mm	75 mm	150 mm	200 mm +
oC			370	400	425	455	510	550
Post Welding
Maximum cooling rate 95 oC per hour down to 95 oC, followed by cooling in still air.N.B. No draught. It is recommended that the workpiece if possible is wrapped in a heat-resistant blanket or buried in sand etc..

RFQ For EN26 Steel

Our Products

[accordionmenu id=”unique7688d80″ accordionmenu=”10397″]

Our Latest Blogs

304 Stainless Steel Angle: Properties, Uses, and Composition

by user | Sep 20, 2024 | Corten steel

304 stainless steel angle is one of the most commonly used steel alloys. Known for its excellent corrosion resistance, strength, and security, it is an essential material in various industries. Comprising 18% chromium and 8% nickel, 304 stainless angle is resistant to...

« Older Entries

Next Entries »

Before You Go…

would you like a copy of our Handy Guide to leasing an industrial unit straight to your inbox?

Error: Contact form not found.



Call Us At

Feel free to call on
+91 79774 55576
022-66394744/45



Drop Mail

For Domestic Queries:
[email protected]

For International Queries:
[email protected]